+38 (0432) 55-49-71
Contact us in a convenient way for you
By Phone
Head of Sales Department
Export Sales Manager
Manager of Vinnytsia Shopping Center
Manager TLC Kyiv
Manager of work with end users
South Region Manager
East Region Manager
West Region Manager
Mon - Fri 09.00 - 18.00
By E-mail
0

Welding electrodes Monolith RC 6013

AWS А5.1: Е6013
EN ISO 2560-A-E 42 0 RC 1 1
CONDITIONS OF USE
  • intended for welding butt and corner joints of metal up to 20 mm thick in all spatial positions, except vertical from top to bottom for electrodes with a diameter of 5.0 mm
  • insensitive to the quality of edge preparation, availability rust and other contamination of the surface of the welded material
  • vertical joints are welded from top to bottom (with a diameter of 2-4 mm) with a short arc or butt.
  • slag should not be allowed to flow in front of the arc
SPECIAL PROPERTIES
  • excellent welding and processing properties provide easy arc ignition and re-ignition, as well as smooth and stable arc burning, reduced metal spatter loss, uniform coating melting, excellent weld metal formation and easy slag separation
  • excellent appearance and ease of operation in all positions.
Monolith RC electrodes are designed for manual direct or alternating current arc welding of ordinary and critical structures made of low-carbon steel grades such as DCOI, DC04,DD13, FeP01, FeP03, CIO, CIOE, 2C10, Cl 5E2C, 2Cl 5, etc.
Package Weight
First select diameter
Packaging data
Diameter, mm Length, mm Number of electrodes in a pack, pcs Pack weight, kg
2 300 50-53; 100-106 0,5; 1
2,5 350 20-28; 54-56; 133-138 0,5; 1; 2.5
3 350 18-19; 35-37; 90-94 0,5; 1; 2.5
3.2 350 16; 32; 78-81 0,5; 1; 2.5
4 450 16-17; 40-41; 81-83 1; 2,5; 5
5 450 53-54 5
Package Weight
First select diameter
Type of coating
rutile-cellulosic
Joint Metal Chemical Composition, %
According to AWS A5.1 / Typical results
C
Carbon
≤ 0,11
Mn
Manganese
0,40…0,65
Si
Silicon
0,15…0,40
P
Phosphorus
≤ 0,035
S
Sulfur
≤ 0,030
Weld metal mechanical properties
According to AWS A5.1 / Typical results
  • Tensile strength, MPa: 500…640
  • Yield strength, MPa: ≥ 420
  • Elongation, %: ≥ 22
  • Impact strength KCU +20˚С, J/cm² ≥ 78
  • Impact energy KV 0˚С, J ≥ 47
Re-drying before welding
  • the permissible moisture content in the coating before use is not more than 0,9%
  • if the electrode coating is moistened above normal, dry for 60 minutes at 120±10 °С.
WELDING PARAMETERS
Welding current strength, A for electrodes with a diameter of, mm
2.0 mm 2.5 mm 3.0 mm 3.2 mm 4.0 mm 5.0 mm
50 – 70 60 – 90 80 – 110 90 – 120 110 – 150 150 – 210
Welding should be carried out with direct current of any polarity (reverse, "+" on the electrode is recommended) or with alternating current with a no-load voltage of the current source of 50 V.
WELDING POSITIONS
PA
PB
PC
PF
PG
PE
PD

My Cart

0
Total:
0 UAH